================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
MMC_TP_SEND_CMD: 0200000000A9FF
MMC_TP_SEND_CMD: 8202FF010191
REPLY CMD1: 3F40FF8080FFFF
MMC_TP_SEND_CMD: 8202FF010191
REPLY CMD1: 3FC0FF8080FFFF
Interface Reset OK!
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V
2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V
1.9-2.0V
MMC_TP_SEND_CMD: 4200000000B2
REPLY CMD2: 3F0600003136FFFFFFFFFF195C493934EBFF
CID : 0600003136FFFFFFFFFF195C4939
MMC_TP_SEND_CMD: C200800000FE
REPLY CMD3: 0302000500F7FF
MMC_TP_SEND_CMD: 92008000008F
REPLY CMD9: 3F904F012A0F5903FFF6DBFFFF8A4000F9FF
CSD : 904F012A0F5903FFF6DBFFFF8A4000F9
MMC_TP_SEND_CMD: E200800000BB
REPLY CMD7: 070200070079FF
MMC_TP_SEND_CMD: 0A00004000A8
REPLY CMD16: 100200090007FF
MMC_TP_SEND_CMD: 1200000000C3
REPLY CMD8: 0802000900FDFF
eMMC Boot Information
BOOT PARTITION : USER AREA
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT: DISABLED
PWR_BOOT_CFG_PROT : DISABLED
eMMC FirmW UPDATE : DISABLED
MMC_TP_SEND_CMD: 62C09D8000F4
REPLY CMD6: 0602000800C7FF
MMC_TP_SEND_CMD: 1200000000C3
REPLY CMD8: 0802000900FDFF
MMC_TP_SEND_CMD: 8A00000000AA
REPLY CMD17: 11020009006BFF
ERROR: EMMC_READ_SINGLE_BLOCK FAILED (CMD17)
Check GREEN Test Point Connection
BOOT Images Written Successfully!
Total Elapsed Time 00:00:05
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f609/lumia-800-repair-erro-1732694/