lumia 800 repair erro

================================================== ====

================================================== ====

eMMC Test Point Connection Module

================================================== ====

================================================== ====



1. DO NOT USE THE PHONE"S BATTERY

2. Connect the Soldered TP Connections to ATF Box

3. Disconnect the USB Cable and Wait until the

the ATF Software will tell you to Connect the USB.



MMC_TP_SEND_CMD: 0200000000A9FF

MMC_TP_SEND_CMD: 8202FF010191

REPLY CMD1: 3F40FF8080FFFF

MMC_TP_SEND_CMD: 8202FF010191

REPLY CMD1: 3FC0FF8080FFFF



Interface Reset OK!

eMMC Supported Voltage Range:

3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V

2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V

1.9-2.0V

MMC_TP_SEND_CMD: 4200000000B2

REPLY CMD2: 3F0600003136FFFFFFFFFF195C493934EBFF



CID : 0600003136FFFFFFFFFF195C4939

MMC_TP_SEND_CMD: C200800000FE

REPLY CMD3: 0302000500F7FF

MMC_TP_SEND_CMD: 92008000008F

REPLY CMD9: 3F904F012A0F5903FFF6DBFFFF8A4000F9FF

CSD : 904F012A0F5903FFF6DBFFFF8A4000F9

MMC_TP_SEND_CMD: E200800000BB

REPLY CMD7: 070200070079FF



MMC_TP_SEND_CMD: 0A00004000A8

REPLY CMD16: 100200090007FF

MMC_TP_SEND_CMD: 1200000000C3

REPLY CMD8: 0802000900FDFF

eMMC Boot Information

BOOT PARTITION : USER AREA

PARTITION ACCESS : R/W USER PARTITION

PERM_BOOT_CFG_PROT: DISABLED

PWR_BOOT_CFG_PROT : DISABLED

eMMC FirmW UPDATE : DISABLED



MMC_TP_SEND_CMD: 62C09D8000F4

REPLY CMD6: 0602000800C7FF

MMC_TP_SEND_CMD: 1200000000C3

REPLY CMD8: 0802000900FDFF

MMC_TP_SEND_CMD: 8A00000000AA

REPLY CMD17: 11020009006BFF

ERROR: EMMC_READ_SINGLE_BLOCK FAILED (CMD17)

Check GREEN Test Point Connection



BOOT Images Written Successfully!



Total Elapsed Time 00:00:05

via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f609/lumia-800-repair-erro-1732694/