GSM News and Tips: Welcome to gsm-tips

Affichage des articles dont le libellé est Welcome to gsm-tips. Afficher tous les articles

lundi 20 avril 2015

box not detect mtk 65xxx

i tray many phone but not detect it

Attached Images

not.jpg (292.1 KB)

via Welcome to gsm-tips http://ift.tt/1D6iX5e

Samsung s5360 error jtag repair

What exactly this problem please help to figure out

via Welcome to gsm-tips http://ift.tt/1cPr7bY

E700f cert filee

E700f cert filee neeeded ??

via Welcome to gsm-tips http://ift.tt/1bdd5zE

KMVYL000LM repair success ( no need change emmc chip )

now a day no need change emmc chip (90%). i m success maybe first in BANGLADESH.
here some picture of my work.

via Welcome to gsm-tips http://ift.tt/1bdd8eH

Why u Banned my client license without intimation
IF U HAVE PROBLEM WITH ME TELL ME DIRECTLY !

Every one know your project is dead and u have no time for updated your software but why you manupalte user to buy new key after banging his/her key

I think You forget i given u Free section in my forum because i was respect you and your work now why you feel jealous if i made some own thing just for my own use and research you have any copyright on all method ????

:mad::mad::mad::mad:

via Welcome to gsm-tips http://ift.tt/1bdd7Yr

Volcano Successfull Stories........

I THINK VOLCANO NEED SOME SUPORTES
Today i am Decide Volcano Successfull reports send

i have many successfull reports for volcano but some 1 bad suporter bad behavre show
than i am stop sharing

but DON;t Worry lets start NOW

Wait and Watch

via Welcome to gsm-tips http://ift.tt/1cPr6EJ

great team pls help about symphony w68q

hello team,
phone model - symphony w68q, cpu - mtk6582.
phone is dead condition.

phone readinfo:

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6582
Hardware version:CA01
Software version:0001
SecCfgVal :0x00000000
BromVersion :0x05
BLVersion :0xFE
>>Boot downloading complete!

i try to flash but not flash complete.

but read info and flash log is same

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6582
Hardware version:CA01
Software version:0001
SecCfgVal :0x00000000
BromVersion :0x05
BLVersion :0xFE
>>Boot downloading complete

i connect is kcolo, phone normal usb connection not detect.

how can i solve this problem ?
pls reply.

thanks
mahir

via Welcome to gsm-tips http://ift.tt/1cPr6ok

sam t999 qcn writing ???

sam t999 no service after unlock. i want write qcn,,,, how can write???

via Welcome to gsm-tips http://ift.tt/1cPr6o9

Cert File confusion? same IMEIs?

seems im not having much luck with samsungs, first i had to get my box repaired now other issues :P

as i understand it the process to unlock newer samsung devices is to root then erase/repair security then write cert, im doing this on a note 3 (N9005) there is no way to read the cert from it that i can see but i backed everything else up possible before i started and am using the cert file from the support section.

everything went ok as id seen in the videos etc online but now the phone is stuck with a different imei, when i press repair imei it just tells me to write cert again but that wont bring back my original imei and the file specifically states that you should not alter it, im assuming the hash below is from the imei, so do we have a generator or something to get the hash for the original or is the only way to leave the device with a wrong IMEI number (which i think would be illegal)

can someone please tell me what im missing here

via Welcome to gsm-tips http://ift.tt/1bdd7Yf

Hdmi 1080 p full hdmi wierless adapter

HDMI 1080 P FULL HDMI WIERLESS ADAPTER

via Welcome to gsm-tips http://ift.tt/1cPr53G

writte G800F cert file

plz i av tried to writte G800f cert file without success first i av rooted the phone

Welcome to Octoplus/Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect SM-G800F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G800F
Selected file: C:\NEW THINK\SAMSUNG\G800f cert file\new\Cert-SM-
G800F_352960061522321_RF8F70JJEPH\Cert-SM-G800F_
352960061522321_RF8F70JJEPH.cert
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Writing Certificate failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G800F
Selected file: C:\NEW THINK\SAMSUNG\G800f cert file\new\Cert-SM-
G800F_352960061522321_RF8F70JJEPH\Cert-SM-G800F_
352960061522321_RF8F70JJEPH.cert
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-G800F
Firmware compiled date: Mon Dec 1 15:49:07 KST 2014
PDA version: G800FXXU1ANL1
CSC version: G800FOXX1AOC1
SW version: G800FXXU1AOC2
Phone IMEI: 350695200123951
Phone SN: R58F80NC5QT
Android version: 4.4.2 (KOT49H)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G800F-Unknown20-04-2015_09-26-09-.asec
file
Phone will restart now. Please don't disconnect cable!
Perform the following steps:
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Writing Certificate failed

plz any issu to writte cert file to this phone?

via Welcome to gsm-tips http://ift.tt/1bdd52B

What is this problem merapi pack1

:confused:

WHAT IS THIS PROBLEM ?

via Welcome to gsm-tips http://ift.tt/1cPr2Fb

[ALIVE PHONE] SM-T231 eMMC DUMP - HOW ?

I have a good working phone here.
How can i read backup for further repair purpose ?

ROM2, ROM3 : Full length, doesn't matter.
But how about ROM1 ? Must i read full length ? It's take so long and render huge file.

Code:

Z3X EasyJtag Software ver. 1.9.1.1

Loading eMMC Addon Firmware... IO: 2800 mV

Box S/N:  , ,FW Ver.: 01.52

CMD Pullup Level:2072 mV

CMD Active Level:2670 mV

eMMC Device Information

EMMC CID : 110100303038474530044DDB100F31F4

EMMC CSD : D05E00320F5903FFFFFFFFEF924000D2

EMMC Manufacturer ID: 0011 , OEM ID: 0100

EMMC Date: 03/2014 Rev.0x4

EMMC NAME: 008GE0 , S/N: 1306202127

EMMC NAME (HEX): 30303847453000

EMMC ROM1 (Main User Data) Capacity: 7456 MB

EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB

EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB

EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB

EMMC Permanent Write Protection: No

EMMC Temporary Write Protection: No

Extended CSD rev 1.7 (MMC Unknown)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)

Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.

Backup saved: 008GE0_1306202127_20150301_1610.extcsd

Searching for partition tables...

Detected GPT over MBR...

Warning: Header Size = 512 (expected 92)

Medium UUID: 52444E41-494F-2044-4D4D-43204449534B

Warning: Entries Count = 128

MMCBLK0P0 (MRD) Range: [0X400000,0X5FFE00] ,Len: 200000

MMCBLK0P1 (MRD_BK) Range: [0X600000,0X7FFE00] ,Len: 200000

MMCBLK0P2 (MEP2) Range: [0X800000,0X9FFE00] ,Len: 200000

MMCBLK0P3 (EFS) Range: [0XA00000,0X1DFFE00] ,Len: 1400000

MMCBLK0P4 (RESERVE) Range: [0X1E00000,0X2BFFE00] ,Len: E00000

MMCBLK0P5 (LOKE2ND) Range: [0X2C80000,0X2DFFE00] ,Len: 180000

MMCBLK0P6 (LOKE1ST) Range: [0X2E80000,0X2FFFE00] ,Len: 180000

MMCBLK0P7 (PARAM) Range: [0X3000000,0X3FFFE00] ,Len: 1000000

MMCBLK0P8 (RECOVERY) Range: [0X4000000,0X4FFFE00] ,Len: 1000000

MMCBLK0P9 (KERNEL) Range: [0X5000000,0X5FFFE00] ,Len: 1000000

MMCBLK0P10 (MODEM) Range: [0X6000000,0X77FFE00] ,Len: 1800000

MMCBLK0P11 (NVM) Range: [0X7800000,0X87FFE00] ,Len: 1000000

MMCBLK0P12 (HIDDEN) Range: [0X8800000,0XEBFFE00] ,Len: 6400000

MMCBLK0P13 (CACHE) Range: [0XEC00000,0X1B3FFE00] ,Len: C800000

MMCBLK0P14 (SYSTEM) Range: [0X1B400000,0X96CFFE00] ,Len: 7B900000

MMCBLK0P15 (USER) Range: [0X96D00000,0X1D1EFFE00] ,Len: 13B200000

Done...Presets has been updated...



Done.

via Welcome to gsm-tips http://ift.tt/1bdd26T

Big up miracle key but???

I am really impressed by the work your doing miracle staff,we have really appreciated the 4 years service you provided to us..But my sincere wish to the manager and programmers instead of buying a dongle it would be very easy and reliable to everyone around the world to access this tool if it was only an online activation

As one of the miracle addict living in yemen i had always been looking forward for a tool that can read write unlock etc qualcomm chips because most of the phones here are qualcomm than spd and mtk..We dont have any distributor in yemen and with current clashes i cant buy the dongle.

I think i am not alone and also it would be easy and speedly selling system to the miracle owners plus cutting cost in materials using to make the dongle..

Please i am humbly requesting for an online activation from the staff, and sorry if i am wrong

BAALWY TECHNOLOGIES

via Welcome to gsm-tips http://ift.tt/1cPr2oo

viwa cant format pls help

Card found: S/N CD77:0128
Chinese Miracle II [MTK module] v 1.17

Operation : Check / Read Info [ v1.17 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8B00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 000100BC009000550056000100BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0095 , [Gigadevice] GD5F4GQ4UAYIG
[NAND] : FLASH_DIE : 0001 00BC 0090 0055 0056 0001 00BC
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NAND : Detecting structure now... Please, wait.
NAND : Structure detect done [30]

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:55
Reconnect Power/Cable!

Operation : Format FileSystem [ v1.17 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8B00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 000100BC009000550056000100BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0095 , [Gigadevice] GD5F4GQ4UAYIG
[NAND] : FLASH_DIE : 0001 00BC 0090 0055 0056 0001 00BC
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Error read initial info , blank flash or wrong settings?

Operation Failed
Elapsed: 00:00:03
Reconnect Power/Cable!

via Welcome to gsm-tips http://ift.tt/1cPr3Zx

Rogers|| Telus || Bell Direct Source :)

Canada Network Direct Source Bulk User Reseller Contact us For Pricing

Service Tool Name

Rogers/Fido Canada iPhone 4|4S|5|5S|5C|6|6+ $4X

Telus Canada Premium 4|4S|5|5S|5C|6|6+ [100% Unlock] $4X

Bell Canada Premium iPhone 4|4S|5|5S|5C|6|6+ [100% Unlock] $3X

Samsung USA & Metro PCS USA Working Very Fast

24-72 Hours Service Runing Hot

Tool Name

Samsung USA All Models [S6 Supported]

Metro PCS USA - ALL GSM Model (Premium)

iPhone Carrier Check 24/7 Instant Auto Service Stable API in Whole Market

iPhone Carrier Check 24/7 Instant With FMI

iPhone Carrier Check With FMI [Auto Instant]

iPhone IMEI Replacement Check (No Refund if IMEI Not Replaced)

Regards

iFactoryUnlocker.com

WhatsApp & Viber : +917405757579

Mail : ifactoryunocker@gmail.com

Skype : ifactoryunlock1

Yahoo: ifactoryunlocker

via Welcome to gsm-tips http://ift.tt/1FZLjyE