Hi all please help me if some one have BML E615 SPD 6820/8810 pac file or others flash file i read backup before format with volcano but volcano can't write backup.
PS: phone hang on android logo
Here are phone info
Volcano Updated: 2015-04-03
Connecting...
Connection successful,connected state!
Version: V3.8
SN:703-676-133
Port:COM190
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: 5
Detection initiated...
D+ = 3, D- = 2
Detection D+/D- with 5,74 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 1 4
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM189), (VID_1782&PID_4D00)
Pinout setting complete.
Available Ports:COM37 COM38 COM190
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 5,68 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 1 4
Setting...
Find USB device:SCI USB2Serial (COM189), (VID_1782&PID_4D00)
Pinouts setting complete!
Waiting for phone's response, press the Power on the phone
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 00AD00BC90555600
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 265m(system),115m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
>>Analysis flash internal data successfully.
PS: phone hang on android logo
Here are phone info
Volcano Updated: 2015-04-03
Connecting...
Connection successful,connected state!
Version: V3.8
SN:703-676-133
Port:COM190
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: null
Gnd: 5
Detection initiated...
D+ = 3, D- = 2
Detection D+/D- with 5,74 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 1 4
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM189), (VID_1782&PID_4D00)
Pinout setting complete.
Available Ports:COM37 COM38 COM190
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 5,68 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 1 4
Setting...
Find USB device:SCI USB2Serial (COM189), (VID_1782&PID_4D00)
Pinouts setting complete!
Waiting for phone's response, press the Power on the phone
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:SC8810/6820 [88100001]
Flash ID: 00AD00BC90555600
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 265m(system),115m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
>>Analysis flash internal data successfully.
via Welcome to gsm-tips http://ift.tt/1IreHRi
Aucun commentaire:
Enregistrer un commentaire