HTC Sensation XE QHUSB_DLOAD mode, multiple communication errors

I have in for repair a Sensation XE (PG58130) which is in QHUSB_DLOAD mode (unknown history of phone), received from customer. Phone is connected by usb cable and psu at 4.2v.



Here is the log from RIFF:

Code:

---

[16/01/2014 10:53:10] [START OPERATION_ID = RESURRECT]

[16/01/2014 10:54:14] Open serial port...OK

[16/01/2014 10:54:14] Connecting to the RIFF Box...OK

[16/01/2014 10:54:14] Firmware Version: 1.37, JTAG Manager Version: 1.55

[16/01/2014 10:54:14] Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879]

[16/01/2014 10:54:14]

[16/01/2014 10:54:14] Connecting to the dead body...OK

[16/01/2014 10:54:14] Detected dead body ID: 0x104210E1 - CORRECT!

[16/01/2014 10:54:14] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK

[16/01/2014 10:54:14] Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

[16/01/2014 10:54:14]

[16/01/2014 10:54:14] Resurrection sequence started.

[16/01/2014 10:54:14] Establish communication with the phone...OK

[16/01/2014 10:54:14] Initializing internal hardware configuration...OK

[16/01/2014 10:54:14] Uploading resurrector data into memory...OK

[16/01/2014 10:54:14] Starting communication with resurrector...OK

[16/01/2014 10:54:14]

[16/01/2014 10:54:14] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000090000000 Bytes = 2.25 GB)

[16/01/2014 10:54:14] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000000080000 Bytes = 0.50 MB)

[16/01/2014 10:54:14]

[16/01/2014 10:54:14] Flashing the dead body...

[16/01/2014 10:54:14] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED

[16/01/2014 10:54:14] ERROR: Failed due to multiple communication errors. Terminating at 0x000003857800

[16/01/2014 10:54:14] [FINISH OPERATION_ID = RESURRECT]

---

Does the id shown above in yellow mean the emmc could be corrupted and needs replacing. I think it is but would like a second opinion. It got up to 8% and timed out. I resoldered the wires 3 times but same results.



I have also tried at 4mhz, max mhz but same results also.

via Welcome to gsm-tips http://ift.tt/1maVA4n