Hi. I have this problem with my MXBOX :
Imei net: 359738005431160
Version: SIMLOCK SERVER VERSION 63
Provider: Orange , Country: United Kingdom
Counter: 0/3, 0/10
CONFIG_DATA: 2343300000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=CLOSED(MCCMNC), DATA=23433F [United Kingdom-Orange ]
BLOCK2: 1=CLOSED(MCCMNC), DATA=23486F
BLOCK3: 1=CLOSED(MCCMNC), DATA=23433F [United Kingdom-Orange ]
BLOCK4: 1=CLOSED(MCCMNC), DATA=23486F
MXKEY [MxKey HTI FLASHER INTERFACE 0], SN: C086FEB7
Using device: HTI BOX, FW ver: 00.07
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: HTIBUS, ver: 3.4.7.0 , NTMP ver: 2.6.0.0
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Phone type: RM-133 (Nokia N73)
SW version: V 05wk47v28.3 26-07-06 RM-133 (c) Nokia.
Boot error: 00 00 00 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
. Im using proper cable and i tried many times. The same thing hapend to another nokia 6120c. Im using Windows 7 but the program is running on XP SP3 platform.
Can anybody help me please?
Thank you
Imei net: 359738005431160
Version: SIMLOCK SERVER VERSION 63
Provider: Orange , Country: United Kingdom
Counter: 0/3, 0/10
CONFIG_DATA: 2343300000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=CLOSED(MCCMNC), DATA=23433F [United Kingdom-Orange ]
BLOCK2: 1=CLOSED(MCCMNC), DATA=23486F
BLOCK3: 1=CLOSED(MCCMNC), DATA=23433F [United Kingdom-Orange ]
BLOCK4: 1=CLOSED(MCCMNC), DATA=23486F
MXKEY [MxKey HTI FLASHER INTERFACE 0], SN: C086FEB7
Using device: HTI BOX, FW ver: 00.07
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: HTIBUS, ver: 3.4.7.0 , NTMP ver: 2.6.0.0
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Phone type: RM-133 (Nokia N73)
SW version: V 05wk47v28.3 26-07-06 RM-133 (c) Nokia.
Boot error: 00 00 00 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
. Im using proper cable and i tried many times. The same thing hapend to another nokia 6120c. Im using Windows 7 but the program is running on XP SP3 platform.
Can anybody help me please?
Thank you
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f550/nokia-n73-unlocking-1760765/
Aucun commentaire:
Enregistrer un commentaire