I have a problem with connecting a samsung phone for unlock in Octoplus Box.
I've selected the "help" button for proper USB connections (mainly use this method for most samsungs') and I have noticed that the "UART" configuration is the same as "USB"
I've updated to the latest 1.4.5 samsung version so it's not software problem
Here's the connection for USB:
USB connection
To connect SGH-I317M phone you have to perform the following steps:
Disconnect Micro USB cable from phone
Go to Menu->Settings->Developer options
Turn on "USB Debugging" option
When message is appear press "Yes"
Go to dial window.
Enter "*#7284#" number
Set "UART" radio button to "MODEM" value
Go to "Qualcomm USB Settings"
Select "RNDIS+DM+MODEM"
Close window
Go to dial window
Press "Read Info" in Octopus Samsung software
Now here's UART:
UART connection
To connect SGH-I317M phone you have to perform the following steps:
Disconnect Samsung Micro UART cable from phone
Go to Menu->Settings->Developer options
Turn on "USB Debugging" option
When message is appear press "Yes"
Go to dial window.
Enter "*#7284#" number
Set "UART" radio button to "MODEM" value
Go to "Qualcomm USB Settings"
Select "RNDIS+DM+MODEM"
Close window
Go to dial window
Press "Read Info" in Octopus Samsung software
Question is what is the CORRECT USB connection options settings I should enter for my samsung in order for octopus box to read the phone?
I've gave up on trying on various combinations on my samsung such as Qualcomm USB settings and decided to unlock it through NsPro which was able to unlock with no problems at all!
I know octopus box is working properly as I have used it in the past with the very old versions (way before octoplus).
Hopefully in the new updates, octopus team will update the correct connection steps for PC to Octoplus Box.
Thank you for reading this and please enter any suggestions and solutions!
I've selected the "help" button for proper USB connections (mainly use this method for most samsungs') and I have noticed that the "UART" configuration is the same as "USB"
I've updated to the latest 1.4.5 samsung version so it's not software problem
Here's the connection for USB:
USB connection
To connect SGH-I317M phone you have to perform the following steps:
Disconnect Micro USB cable from phone
Go to Menu->Settings->Developer options
Turn on "USB Debugging" option
When message is appear press "Yes"
Go to dial window.
Enter "*#7284#" number
Set "UART" radio button to "MODEM" value
Go to "Qualcomm USB Settings"
Select "RNDIS+DM+MODEM"
Close window
Go to dial window
Press "Read Info" in Octopus Samsung software
Now here's UART:
UART connection
To connect SGH-I317M phone you have to perform the following steps:
Disconnect Samsung Micro UART cable from phone
Go to Menu->Settings->Developer options
Turn on "USB Debugging" option
When message is appear press "Yes"
Go to dial window.
Enter "*#7284#" number
Set "UART" radio button to "MODEM" value
Go to "Qualcomm USB Settings"
Select "RNDIS+DM+MODEM"
Close window
Go to dial window
Press "Read Info" in Octopus Samsung software
Question is what is the CORRECT USB connection options settings I should enter for my samsung in order for octopus box to read the phone?
I've gave up on trying on various combinations on my samsung such as Qualcomm USB settings and decided to unlock it through NsPro which was able to unlock with no problems at all!
I know octopus box is working properly as I have used it in the past with the very old versions (way before octoplus).
Hopefully in the new updates, octopus team will update the correct connection steps for PC to Octoplus Box.
Thank you for reading this and please enter any suggestions and solutions!
via Welcome to gsm-tips http://ift.tt/1asQKHD
Aucun commentaire:
Enregistrer un commentaire