htc desire v connect good but cannot repair

For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.

Initialising: HTC DESIRE V PL11100 Config ver.:1.00

I/O Level set to : 2200 mV

Box S/N: 1000000000000000 ,FW Ver.: 01.48

Connecting to Target...

JTAG device: MSM7227A

CPU IDCODE : 0x106220E1 Mfg.: 0x070, Part: 0x0622, Ver.: 0x1

CPU Manufacturer: QUALCOMM , CPU Name: MSM7225A Rev 1.1

Halting CPU...

Initialize hardware...

Starting target communication...

Detecting emmc memory parameters of bank (0) ...

EMMC #0 : ID : 0x646F0000 Name : NROM M Size : 128.0 M , (262144) Blocks

eMMC flash device(s) found, Device ID : 0x0000006f

NAND Writing DBL...

Failed writing file DBL.BIN to eMMC flash 0 at offset 0x00000000

NAND Writing OSBL...

Failed writing file OSBL.BIN to eMMC flash 0 at offset 0x0008D200

NAND Writing HTC...

Failed writing file HTC.BIN to eMMC flash 0 at offset 0x02E73800

NAND Writing MISC...

Failed writing file MISC.BIN to eMMC flash 0 at offset 0x04FC0000

NAND Writing SPL...

Failed writing file SPL.BIN to eMMC flash 0 at offset 0x05000200

NAND Writing SPLASH1...

Failed writing file SPLASH1.BIN to eMMC flash 0 at offset 0x05100400

NAND Writing RECOVERY...

Failed writing file RECOVERY.BIN to eMMC flash 0 at offset 0x05340800

NAND Writing BOOT...

Failed writing file BOOT.BIN to eMMC flash 0 at offset 0x05BBFE00

NAND Writing WLAN...

Failed writing file WLAN.BIN to eMMC flash 0 at offset 0x05FC0000

All Done.

Using EasyRepair Mode...

Checking repair data...

EasyJtag Suite ver.: 1.0.106.5 / wxWidgets 3.1.0-W-U started.

Operating system ver.: Windows 7 (build 7601, Service Pack 1).





emmc need to replace ?

via Welcome to gsm-tips http://ift.tt/OZarCl