hi legija i have htc one pn07110 after update with wifi now only qualcomm hs-usb when connected usb
3/26/2014 12:50:29 PM] [START OPERATION_ID = RESURRECT]
[3/26/2014 12:51:54 PM] Open serial port...OK
[3/26/2014 12:51:54 PM] Connecting to the RIFF Box...OK
[3/26/2014 12:51:54 PM] Firmware Version: 1.37, JTAG Manager Version: 1.55
[3/26/2014 12:51:54 PM] Selected Resurrector: [HTC OneM7 U (PN0711000) V1.0.5046.47163]
[3/26/2014 12:51:54 PM] Restarting target (nRST Low then High)...OK
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Connecting to the dead body...OK
[3/26/2014 12:51:54 PM] Detected dead body ID: 0x207150E1 - CORRECT!
[3/26/2014 12:51:54 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
[3/26/2014 12:51:54 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Resurrection sequence started.
[3/26/2014 12:51:54 PM] Establish communication with the phone...OK
[3/26/2014 12:51:54 PM] Initializing internal hardware configuration...OK
[3/26/2014 12:51:54 PM] Uploading resurrector data into memory...OK
[3/26/2014 12:51:54 PM] Starting communication with resurrector...OK
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HBG4E, 0x000748000000 Bytes = 29.13 GB)
[3/26/2014 12:51:54 PM] Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HBG4E, 0x000000400000 Bytes = 4.00 MB)
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Flashing the dead body...OK
[3/26/2014 12:51:54 PM] Resurrection complete!
[3/26/2014 12:51:54 PM] [FINISH OPERATION_ID = RESURRECT]
after repair it is the same what do you prefer to do ?
3/26/2014 12:50:29 PM] [START OPERATION_ID = RESURRECT]
[3/26/2014 12:51:54 PM] Open serial port...OK
[3/26/2014 12:51:54 PM] Connecting to the RIFF Box...OK
[3/26/2014 12:51:54 PM] Firmware Version: 1.37, JTAG Manager Version: 1.55
[3/26/2014 12:51:54 PM] Selected Resurrector: [HTC OneM7 U (PN0711000) V1.0.5046.47163]
[3/26/2014 12:51:54 PM] Restarting target (nRST Low then High)...OK
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Connecting to the dead body...OK
[3/26/2014 12:51:54 PM] Detected dead body ID: 0x207150E1 - CORRECT!
[3/26/2014 12:51:54 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
[3/26/2014 12:51:54 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Resurrection sequence started.
[3/26/2014 12:51:54 PM] Establish communication with the phone...OK
[3/26/2014 12:51:54 PM] Initializing internal hardware configuration...OK
[3/26/2014 12:51:54 PM] Uploading resurrector data into memory...OK
[3/26/2014 12:51:54 PM] Starting communication with resurrector...OK
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HBG4E, 0x000748000000 Bytes = 29.13 GB)
[3/26/2014 12:51:54 PM] Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HBG4E, 0x000000400000 Bytes = 4.00 MB)
[3/26/2014 12:51:54 PM]
[3/26/2014 12:51:54 PM] Flashing the dead body...OK
[3/26/2014 12:51:54 PM] Resurrection complete!
[3/26/2014 12:51:54 PM] [FINISH OPERATION_ID = RESURRECT]
after repair it is the same what do you prefer to do ?
via Welcome to gsm-tips http://ift.tt/1fiGX9e
Aucun commentaire:
Enregistrer un commentaire