hello I can not be recognized by the phone. if imposed dm over UART the error is:
Welcome to Octoplus/Octopus Box Samsung software version 1.5.0
-----------------------------------------------------------------------------------
To connect GT-N7105 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close window.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7105
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
however, if imposed: DM/DUM over HS-USB is
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: GT-N7105
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM5
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: GT-N7105
Mode: Emergency
Write IMEI failed
???
phone is root
firmware is 4.1.1
Welcome to Octoplus/Octopus Box Samsung software version 1.5.0
-----------------------------------------------------------------------------------
To connect GT-N7105 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close window.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7105
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
however, if imposed: DM/DUM over HS-USB is
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: GT-N7105
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM5
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM5
Selected model: GT-N7105
Mode: Emergency
Write IMEI failed
???
phone is root
firmware is 4.1.1
via Welcome to gsm-tips http://ift.tt/P6JFrW
Aucun commentaire:
Enregistrer un commentaire