i8190 (512mb_OK_locked bin file write error)

EasyJtag Suite ver.: 1.6.1.1 / wxWidgets 3.1.0-W-U started.

Operating system ver.: Windows 7 (build 7601, Service Pack 1).



For support and updates visit http://easy-jtag.com

Check security...OK

Initialising: SAMSUNG GT-I8190 Config ver.:1.01

I/O Level set to : 2600 mV

Box S/N: 0404111A58FD0E5F ,FW Ver.: 01.50

Connecting to Target...

U8500 USB BOOTROM : device 04CC:8500 opened

success: set configuration #1

success: claim_interface #0

Sending XLOADER...

success: bulk read 4 bytes

Done.

JTAG device: U8500

CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4

CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9

JTAG device: U8500

CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6

CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC

Halting CPU...

Initialize hardware...

Starting target communication...

Detecting emmc memory parameters of bank (0) ...

EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks

EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks

eMMC flash device(s) found, Device ID : 0x00450000

You must select flash file first!

Checking NAND Image : I:\all setup\Easy-Jtag\i8190\512mb_OK_locked.bin

File successefuly loaded!

Writing memory from file...I:\all setup\Easy-Jtag\i8190\512mb_OK_locked.bin

Timeout Error while reading approx : 0x00000100 bytes over DCC

Unknown DCC answer /PROTOCOL/

Failed writing file I:/all setup/Easy-Jtag/i8190/512mb_OK_locked.bin to eMMC flash 0 at offset 0x1FB70000

Done with error(s)...

via Welcome to gsm-tips http://ift.tt/1skxHbH