nokia x after boot repair not flashing

hello atf team! nokia x after boot repairing not flashing only recovery mode, volume up and down worked, computer not detect, product codel lost i am use boot file NOKIA_X RM-980 FULL_BOOT_11.1.1



log repair boot

Default language ID 0x0419

JTAG Interface Connected, S/N 0xXXXXXX

Resetting and Exploring JTAG chain...No Devices found in Chain!

Loading AFP (Please Wait)...OK

AFP revision 4, compiled 16.07.2014 12:06:00

================================================== ========

Phone Type : Nokia X [RM-980]

CPU Type : Qualcomm MSM8225

Storage TYpe : eMMC 4GB

Boot Package : Full Boot Restore

Firmware Version: 10.0.3

================================================== ========

1. Make sure JTAG Connection is 100% OK

2. Always Disconnect the Phone BATTERY

3. Connect USB Cable to Phone

4. Connect RJ-45 JTAG Cable to ATF Box

5. Select the Correct Phone Type RM-XXX

6. Use RESET JTAG button to check the JTAG Connection

7. Click RESTORE BOOT button to Start Boot Repairs

----------------------------------------------------------



Loading AFP (Please Wait)...OK

AFP revision 4, compiled 16.07.2014 12:10:00

================================================== ========

Phone Type : Nokia X [RM-980]

CPU Type : Qualcomm MSM8225

Storage TYpe : eMMC 4GB

Boot Package : Full Boot Restore

Firmware Version: 11.1.1

================================================== ========

1. Make sure JTAG Connection is 100% OK

2. Always Disconnect the Phone BATTERY

3. Connect USB Cable to Phone

4. Connect RJ-45 JTAG Cable to ATF Box

5. Select the Correct Phone Type RM-XXX

6. Use RESET JTAG button to check the JTAG Connection

7. Click RESTORE BOOT button to Start Boot Repairs

----------------------------------------------------------



Restore Boot...

Waiting for Device Connection 20 second(s)...OK

Resetting and Exploring JTAG chain...OK

Halting Core...OK

Initializing Device...OK

Detecting EMMC #1 ID...1501005335584B4D4201540BD4A021FA

Flash Description: Samsung S5XKMB, 3.64 GiB, SN 540BD4A0, Feb 1998

Partition Config: Boot from USER, Boot ACK OFF (0x38)

Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)

Testing Device Memory...OK

Sending Flash Loader...OK (92075 Op/Sec)

Restoring Partition #1...OK

Restoring Partition #2...OK

Restoring Partition #3...OK

Restoring Partition #4...OK

Restoring Partition #5...OK

Restoring Partition #6...OK

Restoring Partition #7...OK

Completed in 0h 2m 36s. Code Download Speed 345 KiB/sec.

Boot Restore Done!

================================================== ===========

Assemble Phone and Start Normally

If Phone cannot Start, perform USB Firmware Update Procedure

================================================== ===========



Nokia Android Phone Flashing Started





================================================== ====

Nokia Android Firmware Flasher

================================================== ====



If the Phone is ALIVE

1. Power On the Phone and Connect it to the USB Port



If the Phone is DEAD

1. Press and Hold the VOLUME UP button

2. Connect it to the USB Port while still Pressing

the VOLUME UP button

3. Continue to Press the VOLUME UP button for 15

more seconds

================================================== ====





================================================== ====

ERROR: Active Phone Handle was NOT DETECTED

================================================== ====



1. Make Sure USB Drivers are Installed!



2. Make Sure Battery is Fully Charged!

================================================== ====

via Welcome to gsm-tips http://ift.tt/1vb7e1T