Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [SE LT26i V1.0.5179.40814]
Connecting to the dead body...OK
Detected dead body ID: 0x204210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (032G4C, 0x00076E000000 Bytes = 29.72 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (032G4C, 0x000000200000 Bytes = 2.00 MB)
Flashing the dead body...OK
Resurrection complete!
The phone was functional (counter 0) and i have security back-up made with setool.I made a huge mistake by trying to write the security of other phone and got bricked.The problem is i can't revive it with riff.After resurrect as seen in the log it doesn't even connect to usb....Any ideas or suggestions how can i at least write a full back-up from other phone even if the imei is incorrect?
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [SE LT26i V1.0.5179.40814]
Connecting to the dead body...OK
Detected dead body ID: 0x204210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (032G4C, 0x00076E000000 Bytes = 29.72 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (032G4C, 0x000000200000 Bytes = 2.00 MB)
Flashing the dead body...OK
Resurrection complete!
The phone was functional (counter 0) and i have security back-up made with setool.I made a huge mistake by trying to write the security of other phone and got bricked.The problem is i can't revive it with riff.After resurrect as seen in the log it doesn't even connect to usb....Any ideas or suggestions how can i at least write a full back-up from other phone even if the imei is incorrect?
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f634/lt26i-help-1897742/
Aucun commentaire:
Enregistrer un commentaire