Hi team i have p3100 it restarts after about 10 seconds.Hard reset has no effect and no data loss.Tried to flash .failed. Here are the logs
Welcome to Octoplus/Octopus Box Samsung software version 1.7.8
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-P3100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
Selected firmware file: P3100JKCMB1_P3100ILOCMB1_ILO_Android_
4.1.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-P3100 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume - " + "Power" keys.
Found phone on
Firmware write started.
Writing FACTORYFS section...
Writing Firmware Failed
How to solve this problem.
REGDS
NRENDRA SINGH
Welcome to Octoplus/Octopus Box Samsung software version 1.7.8
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-P3100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
Selected firmware file: P3100JKCMB1_P3100ILOCMB1_ILO_Android_
4.1.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-P3100 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume - " + "Power" keys.
Found phone on
Firmware write started.
Writing FACTORYFS section...
Writing Firmware Failed
How to solve this problem.
REGDS
NRENDRA SINGH
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f684/samsung-p3100-restarts-problem-1897449/
Aucun commentaire:
Enregistrer un commentaire