Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.93.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616----------------F ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
Done with error(s)...:confused:
Checking repair data...
EasyJtag Suite ver.: 1.0.93.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616----------------F ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
Done with error(s)...:confused:
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f672/i9070-dead-boot-repair-problem-1754663/
Aucun commentaire:
Enregistrer un commentaire