Welcome to Octoplus/Octopus Box Samsung software version 1.4.2
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: N7000ZSLR1_N7000OZSLR1_TGY_Android_
4.1.2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-N7000 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
N7000ZSLR1_N7000OZSLR1_TGY_Android_4.1.2.oct
my phone problem baseband and imei when flash the version then samsung logo and restart need solution.
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: N7000ZSLR1_N7000OZSLR1_TGY_Android_
4.1.2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-N7000 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
N7000ZSLR1_N7000OZSLR1_TGY_Android_4.1.2.oct
my phone problem baseband and imei when flash the version then samsung logo and restart need solution.
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f684/n7000-help-1754720/
Aucun commentaire:
Enregistrer un commentaire