Need hitech amaze s250 flash file

plz upload hitech amaze s250 flash file



Volcano Updated: 2013-12-09

Connecting...

Connection successful,connected state!

Version: V3.8

SN:006-076-053

Port:COM19

After format or Flash you have to press & hold power button for at least 1.30 mins.

Note for win7 users :

Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.

After that the spd drivers will have the ability to be loaded.

For many phones, charge pins need to be set in order to identify USB devices.

Detecting D+ and D-...

Vcc: null

Gnd: null

Detection initiated...

Found: D+ = 3, D- = 2

Detection D+/D- with 3.64 seconds!

Analyzing USB device, please wait...

Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)

Detection completed.

Setting pinouts...

Pinout setting complete.

Setting pinouts...

Pinout setting complete.

Reset USB device and search it...

Find USB device:SCI USB2Serial (COM20), (VID_1782&PID_4D00)

Available Ports:COM1 COM2 COM19 COM20





Internal version: SPRD3

Boot downloaded.

Start boot please wait a moment....

Spreadtrum Boot Block version 1.1

Boot downloaded.

CPU TYPE:SC8810/6820 [88100040]

Flash ID: 009800BC90667600

Flash Type:[TOSHIBA] TYBC0A111236KC10

FLASH LEN:0x20000000

mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 215m(system),175m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic)

>>Analysis flash internal data successfully.

via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f728/need-hitech-amaze-s250-flash-file-1750028/