Hello is possible make cable without external power for K750 SonyEricsson ? NSPro is same as UFS pinout so SonyEricsson K750 UFS cable should work with NSPro (anybody have tested?). Setool cable is without external vbat cables but I have noted that used these pins:
1= VPP
2= ---
3= TX / CTMS
4= DFMS
5= DTMS
6= RX / CFMS
7= GROUND
8= 3.0V
and NSPRO / UFS use: (and some questions to better understand NSPRO Box pins)
1 = POWER ON (It's autoignition ??)
2 = USB + USB VPP (It's USB 5V ? Need to use with ex. 1N400x diode ?? )
3 = N\A (Not Connected ?? )
4 = RX (It's CFMS or DFMS ?? )
5 = TX (It's CTMS or DTMS ?? )
6 = USB D- (It's CFMS or DFMS ?? )
7 = GND
8 = USB D+ (It's CTMS or DTMS ?? )
and very important question - why some interfaces uses only RX/TX and some RX/TX + USB D-/USB D+ ?
1= VPP
2= ---
3= TX / CTMS
4= DFMS
5= DTMS
6= RX / CFMS
7= GROUND
8= 3.0V
and NSPRO / UFS use: (and some questions to better understand NSPRO Box pins)
1 = POWER ON (It's autoignition ??)
2 = USB + USB VPP (It's USB 5V ? Need to use with ex. 1N400x diode ?? )
3 = N\A (Not Connected ?? )
4 = RX (It's CFMS or DFMS ?? )
5 = TX (It's CTMS or DTMS ?? )
6 = USB D- (It's CFMS or DFMS ?? )
7 = GND
8 = USB D+ (It's CTMS or DTMS ?? )
and very important question - why some interfaces uses only RX/TX and some RX/TX + USB D-/USB D+ ?
via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f286/nspro-com-sonyericsson-interface-1752369/
Aucun commentaire:
Enregistrer un commentaire