i9505 when make call display disappear

here log



Welcome to Octoplus/Octopus Box Samsung software version 1.6.0

-----------------------------------------------------------------------------------

To connect GT-I9505 phone you have to perform the following steps:

1. Disconnect USB cable from phone.

2. Go to Menu->Settings->More->About Device.

3.Tap on "Build number" 7 times to enable developer options.

4. Go to Menu->Settings->More->Developer options.

5. Turn on "USB Debugging" option.

6. Go to dial window.

7. Enter "*#0808#" number.

8. Select "DM+Modem+ADB".

9. Press Home button.

10. Go to dial window.

11. Enter "*#9090#" number.

12. Set "Diag config" to "USB" value.

13. Restart phone.

14. Press "Read Info" in software.

Selected firmware file: I9505XXUEMK9_I9505OJVEMK4

_I9505XXUEMK9_HOME.oct

Please switch your phone to the download mode and connect it to a

PC.

To put GT-I9505 phone into download mode you have to perform the

following steps:

1. Reconnect phone battery.

2. Press and hold "Volume - " + "Home" + "Power" buttons.

3. When phone turns on press "Volume+" button.

Found phone on

Firmware write started.

Writing SBL1 section...

SBL1 section has been written successfully.

Writing SBL2 section...

SBL2 section has been written successfully.

Writing SBL3 section...

SBL3 section has been written successfully.

Writing RPM section...

RPM section has been written successfully.

Writing ABOOT section...

ABOOT section has been written successfully.

Writing TZ section...

TZ section has been written successfully.

Writing BOOT section...

BOOT section has been written successfully.

Writing RECOVERY section...

RECOVERY section has been written successfully.

Writing SYSTEM section...

SYSTEM section has been written successfully.

Writing MDM section...

MDM section has been written successfully.

Writing APNHLOS section...

APNHLOS section has been written successfully.

Writing CACHE section...

CACHE section has been written successfully.

Writing HIDDEN section...

HIDDEN section has been written successfully.

Firmware writing successfully completed.

via Welcome to gsm-tips http://ift.tt/1qPe26B