Trouble write chip ISP i9300

Please help, i get these errors when i press the write button

Quote:

Writing... Device Ready... Device Ready...OK! ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 1.8 Pullup: 2.72 2.90 0.00 0.95 2.85 0.45 1.8 Low : 2.73 0.54 0.00 0.00 1.15 1.68 1.8 High : 2.71 1.00 0.00 1.63 2.18 0.75 ... 2.5 Pullup: 2.72 2.92 0.00 1.32 2.95 0.51 2.5 Low : 2.69 2.15 0.00 0.00 1.68 1.71 2.5 High : 2.72 3.07 0.00 2.39 2.41 2.16 ... 3.3 Pullup: 2.71 2.56 0.00 1.62 2.61 2.04 3.3 Low : 2.71 3.10 0.00 0.00 2.14 1.64 3.3 High : 2.72 2.40 0.00 2.73 2.44 2.38 ... Power On : 2.73 1.78 2.48 0.60 0.58 0.00 Set Low : 2.73 1.78 2.48 0.01 0.00 0.00 Set High: 2.73 1.78 2.48 1.88 1.91 1.91 ... Work Voltage: 2.73 1.77 2.48 1.01 1.59 0.01 --------------------------------------------------- eMMC ORC: 00000000 FC eMMC CID: 0000000000000000,bad code! >>Write chip lost!

AND

Quote:

Writing... Device Ready... Device Ready...OK! ID check... Level (V): VCC V18 VCCQ D0 CMD CLK 1.8 Pullup: 2.21 0.00 0.29 0.20 0.21 0.00 1.8 Low : 2.16 0.00 0.29 0.00 0.00 0.00 1.8 High : 2.11 0.52 0.29 1.10 1.13 1.27 ... 2.5 Pullup: 1.63 0.00 0.29 0.25 0.25 0.00 2.5 Low : 1.59 0.00 0.29 0.01 0.00 0.00 2.5 High : 1.56 0.83 0.29 1.47 1.50 1.67 ... 3.3 Pullup: 1.15 0.00 0.29 0.28 0.28 0.00 3.3 Low : 1.13 0.00 0.29 0.00 0.00 0.00 3.3 High : 1.11 1.11 0.29 1.80 1.83 2.02 ... Power On : 2.83 1.76 2.77 0.64 0.62 0.00 Set Low : 2.83 1.75 2.77 0.01 0.00 0.00 Set High: 2.83 1.76 2.77 1.89 1.92 1.92 ... Work Voltage: 2.83 1.76 2.77 1.00 1.60 0.01 --------------------------------------------------- eMMC ORC: FFFFFFFF F7 eMMC CID: 0000000000000000,bad code! Write chip lost!

Using GPGeMMC_v1.25

Windows 7 32Bit

Plugging in USB cable, battery, press write, ok and power button

above results



Please advise

Thanks!

via Welcome to gsm-tips http://ift.tt/1pF8gzg