sgh-i527 Bricked after wrote the firmware

Octoplus Mod Please Help!

I used Octoplus Box Samsung Software to write the firmware and here is the problem I got into.



It says successful but now the phone is showing the black screen with three lines show below when turning on the phone:



Image size too large!! W:1080 H:1920 (red color)

Display image fail (yellow color)

Secure Fail: keanel (red color)



Thanks!:confused:









Welcome to Octoplus/Octopus Box Samsung software version 1.7.3

-----------------------------------------------------------------------------------

To connect SGH-M919 phone you have to perform the following steps:

1. Disconnect USB cable from phone.

2. Go to Menu->Settings->More->About Device.

3.Tap on "Build number" 7 times to enable developer options.

4. Go to Menu->Settings->More->Developer options.

5. Turn on "USB Debugging" option.

6. Go to dial window.

7. Enter "*#0808#" number.

8. Select "DM+Modem+ADB".

9. Press Home button.

10. Go to dial window.

11. Enter "*#9090#" number.

12. Set "Diag config" to "USB" value.

13. Restart phone.

14. Press "Read Info" in software.

-----------------------------------------------------------------------------------

To connect SGH-I537 phone you have to perform the following steps:

1. Disconnect USB cable from phone.

2. Go to Menu->Settings->More->About Device.

3.Tap on "Build number" 7 times to enable developer options.

4. Go to Menu->Settings->More->Developer options.

5. Turn on "USB Debugging" option.

6. Go to dial window.

7. Enter "*#0808#" number.

8. Select "DM+Modem+ADB".

9. Press Home button.

10. Go to dial window.

11. Enter "*#9090#" number.

12. Set "Diag config" to "USB" value.

13. Restart phone.

14. Press "Read Info" in software.

Please, select firmware file first!

-----------------------------------------------------------------------------------

To connect SGH-I527 phone you have to perform the following steps:

1. Disconnect USB cable from phone.

2. Go to Menu->Settings->More->About Device.

3.Tap on "Build number" 7 times to enable developer options.

4. Go to Menu->Settings->More->Developer options.

5. Turn on "USB Debugging" option.

6. Go to dial window.

7. Enter "*#0808#" number.

8. Select "DM+Modem+ADB".

9. Press Home button.

10. Go to dial window.

11. Enter "*#9090#" number.

12. Set "Diag config" to "USB" value.

13. Restart phone.

14. Press "Read Info" in software.

Please, select firmware file first!

Selected firmware file: I527UCUAMK2_I527ATTAMK2_I527UCUAMK2

_HOME.oct

Please put the phone into Download Mode and connect USB cable.

To put SGH-I527 into Download Mode, You have to perform the

following steps:

1. Reconnect the battery.

2. Press and hold "Volume-" + "Home" + "Power ON" keys.

3. When phone turns on, press "Volume+" key.

Found phone on

Firmware write started.

Writing SBL2 section...

SBL2 section has been written successfully.

Writing SBL3 section...

SBL3 section has been written successfully.

Writing RPM section...

RPM section has been written successfully.

Writing ABOOT section...

ABOOT section has been written successfully.

Writing TZ section...

TZ section has been written successfully.

Writing BOOT section...

BOOT section has been written successfully.

Writing RECOVERY section...

RECOVERY section has been written successfully.

Writing SYSTEM section...

SYSTEM section has been written successfully.

Writing MODEM section...

MODEM section has been written successfully.

Writing CACHE section...

CACHE section has been written successfully.

Writing HIDDEN section...

HIDDEN section has been written successfully.

Firmware writing successfully completed.

via Welcome to gsm-tips http://forum.gsmhosting.com/vbb/f684/sgh-i527-bricked-after-wrote-firmware-1874120/