Hi all
SAMSUNG i9070p bricked via write file i9070
After Resuscitation Via Riff Box:
en serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung I9070p V1.0.4676.1716]
Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x51): Communication is not established. Terminating.
Solution:
#define CMD_RESP_JTAG_POWER_FAILED 0x51
I Install Driver NTU8500 And connect via USB But this pc Nothing known!!!
Plz help For Resurrection
SAMSUNG i9070p bricked via write file i9070
After Resuscitation Via Riff Box:
en serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung I9070p V1.0.4676.1716]
Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x51): Communication is not established. Terminating.
Solution:
#define CMD_RESP_JTAG_POWER_FAILED 0x51
I Install Driver NTU8500 And connect via USB But this pc Nothing known!!!
Plz help For Resurrection
via Welcome to gsm-tips http://ift.tt/1iBGdRG
Aucun commentaire:
Enregistrer un commentaire