i9500 Write Block Failed, Reason: DATA SND CRC Error

hi guy



cant seem to write to emmc on i9500



phone blinked samsung logo- will get stuck on initialzation in odin



gose into download mode but not into recovery





CMD Active Level:1773 mV

Reading S.M.A.R.T

S.M.A.R.T Ver. 0 , Card Error mode : Normal

Super Block size : 0x00800000 (8388608 bytes)

Super Page size : 0x00008000 (32768 bytes)

Optimal Write size : 0x00010000 (65536 bytes)

Read Reclaim count : 0

Optimal TRIM size : 0x00001000 (4096 bytes)

Total Number of banks : 2

Initial bad blocks per bank : 4,6,0,0

Runtime bad blocks per bank : 0,0,0,0

Reserved blocks left per bank : 34,32,0,0

All Erase counts (min,avg,max): 1,22,683

SLC Erase counts (min,avg,max): 2,522,683

MLC Erase counts (min,avg,max): 1,15,101

S.M.A.R.T Report Done !!!



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

CMD Pullup Level:1082 mV

CMD Active Level:1773 mV

Input file : C:\Documents and Settings\Akash\Desktop\I9500_Alive_Rom2_1mb.bin

Writing 000000100000 bytes to 00000000 ...ROM2 (BOOT1 ROM)

Retry writing adress 0x00000000 (Attempt #1)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #2)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #3)...

Retry Fail !!!

Write Block Failed, Reason: DATA SND CRC Error



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

USB Open Failed, Reason: PORT Open Error



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

CMD Pullup Level:1082 mV

CMD Active Level:1773 mV

Input file : C:\Documents and Settings\Akash\Desktop\I9500_Alive_Rom2_1mb.bin

Writing 000000100000 bytes to 00000000 ...ROM2 (BOOT1 ROM)

Retry writing adress 0x00000000 (Attempt #1)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #2)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #3)...

Retry Fail !!!

Write Block Failed, Reason: DATA SND CRC Error



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

CMD Pullup Level:1082 mV

CMD Active Level:1773 mV

Input file : C:\Documents and Settings\Akash\Desktop\I9500_Alive_Rom2_1mb.bin

Writing 000000100000 bytes to 00000000 ...ROM2 (BOOT1 ROM)

Retry writing adress 0x00000000 (Attempt #1)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #2)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #3)...

Retry Fail !!!

Write Block Failed, Reason: DATA SND CRC Error



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

CMD Pullup Level:1082 mV

CMD Active Level:1773 mV

Input file : C:\Documents and Settings\Akash\Desktop\I9500 BOOT2.bin

Writing 000000400000 bytes to 00000000 ...ROM2 (BOOT1 ROM)

Retry writing adress 0x00000000 (Attempt #1)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #2)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #3)...

Retry Fail !!!

Write Block Failed, Reason: DATA SND CRC Error



Z3X EasyJtag Software ver. 1.6.6.7

Skip loading eMMC Addon Firmware

CMD Pullup Level:1082 mV

CMD Active Level:1773 mV

Input file : C:\Documents and Settings\Akash\Desktop\I9500 BOOT2.bin

Writing 000000400000 bytes to 00000000 ...ROM3 (BOOT2 ROM)

Retry writing adress 0x00000000 (Attempt #1)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #2)...

Retry Fail !!!

Retry writing adress 0x00000000 (Attempt #3)...

Retry Fail !!!

Write Block Failed, Reason: DATA SND CRC Error

via Welcome to gsm-tips http://ift.tt/1yqU15V