Hello,
Please help me. Something is wrong either I don't know something or your system is faulty. My scenario #1:
1. I connect battery adapter to battery port, battery to the adapter,
2. Connect and put on the light sensor
3. Connect charger to microUSB port
4. Set both jumpers to +5V
5. Put SIM in and manually power on the phone
6. Turn phone off once it adjusts time/date
7. Turn phone on again so I see it let's me enter the passcode
8. Connect iPower adapter to MFC Dongle, connect Dongle to 3in1 cable
My scenario #2:
The phone turns off and does not boot up again automatically. If I disconnect the iPower adapter from the dongle and reconnect it, the phone boots up but the date is wrong again and I must cancel the process.
Tested on iPhone 6 iOS 8.0.2 and iPhone 5 iOS 8.1. Acts the same.
This is my connection:
Tested iPhone 5 8.0:
Same connection, but second jumper on ext possition, external charger connected to +/- ext holes. The dongle seems to work but stops after 4 tries and I must dissconnect/connect iPower to the dongle in order to start it working again. Every 4 tries.
Please help me. Something is wrong either I don't know something or your system is faulty. My scenario #1:
1. I connect battery adapter to battery port, battery to the adapter,
2. Connect and put on the light sensor
3. Connect charger to microUSB port
4. Set both jumpers to +5V
5. Put SIM in and manually power on the phone
6. Turn phone off once it adjusts time/date
7. Turn phone on again so I see it let's me enter the passcode
8. Connect iPower adapter to MFC Dongle, connect Dongle to 3in1 cable
My scenario #2:
The phone turns off and does not boot up again automatically. If I disconnect the iPower adapter from the dongle and reconnect it, the phone boots up but the date is wrong again and I must cancel the process.
Tested on iPhone 6 iOS 8.0.2 and iPhone 5 iOS 8.1. Acts the same.
This is my connection:
Tested iPhone 5 8.0:
Same connection, but second jumper on ext possition, external charger connected to +/- ext holes. The dongle seems to work but stops after 4 tries and I must dissconnect/connect iPower to the dongle in order to start it working again. Every 4 tries.
via Welcome to gsm-tips http://ift.tt/16Lnccq
Aucun commentaire:
Enregistrer un commentaire