need help from you guys,,,
have some problem with repair imei
this is the log :
Welcome to Octoplus/Octopus Box Samsung software version 1.7.5
-----------------------------------------------------------------------------------
To connect SM-T311 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM32
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Reading EFS, please wait...
EFS read successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Writing EFS, please wait...
Phone will restart now
EFS write successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Repairing network failed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
need driver MTP device too..
thanks
http://ift.tt/1zmzjbo
this is my screen shot link,,
have some problem with repair imei
this is the log :
Welcome to Octoplus/Octopus Box Samsung software version 1.7.5
-----------------------------------------------------------------------------------
To connect SM-T311 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM32
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Reading EFS, please wait...
EFS read successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Writing EFS, please wait...
Phone will restart now
EFS write successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Repairing network failed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM32
Selected model: SM-T311
Detected phone model: SM-T311
Firmware compiled date: Sat Jul 6 12:02:18 KST 2013
PDA version: T311XWUAMG2
CSC version: T311OLBAMG1
SW version: Unknown
Phone IMEI: Unknown
Android version: 4.2.2 (JDQ39)
Checking Root:
Phone is Rooted.
Repairing network. Please wait, this can take some time...
Network is successfully repaired.
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#7284# number.
4. Set "UART" radio button to "MODEM" value.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Write IMEI failed
need driver MTP device too..
thanks
http://ift.tt/1zmzjbo
this is my screen shot link,,
via Welcome to gsm-tips http://ift.tt/1LSCxJ2
Aucun commentaire:
Enregistrer un commentaire