Samsung GT-I9070 halt error 000 help

Welcome to Octoplus JTAG Box Software version 1.6.7



To make Repair Samsung GT-I9070 You need:

1. Connect it via Jtag cable to Box.

2. Connect to PC via USB cable (use both connection).

3. Install U8500 driver (if driver was not installed automatically) from folder "C:\Program Files\GSMServer\Medusa\Driver\U8500\" and try to connect the phone again.



Note: This phone can connect more longer, so You need to wait 30-50 seconds.

Selected device model: Samsung GT-I9070

Connecting. Please wait...

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.

Please connect the target device and power it on...

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.

Please connect the target device and power it on...

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.

Resetting target. Please wait...

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S256 revision D.

Detected TAP ID: 62286041, IR Length = 6.

ERROR[000]: Unable to halt core.





i try diff. jtag cable

resolder wires



any things can you suggest ?

via Welcome to gsm-tips http://ift.tt/1yyrKjy