Welcome to Octoplus/Octopus Box Samsung software version 1.9.1
-----------------------------------------------------------------------------------
To connect SM-G900T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-N915T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: N910TUVU1ANK4_N910TTMB1ANK4
_TMB_Android_4.4.4.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
File has been created for a different phone model.
Selected firmware file: N915TUBU1AOA2_N915TUWA1AOA3
_PET_Android_4.4.4.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
To connect SM-N915T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
ADB server killed.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-N915T
Firmware compiled date: Mon Jan 19 20:52:52 KST 2015
PDA version: N915TUBU1AOA2
CSC version: N915TUWA1AOA3
SW version: N915TUBU1AOA2
Phone IMEI: Unknown
Phone SN: R38FB0S72EM
Android version: 4.4.4 (KTU84P)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Selected file: C:\Users\Owner\Desktop\Note 4\N910G_
355306065643142.cert
Perform the following steps:
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Writing Certificate failed
-----------------------------------------------------------------------------------
To connect SM-G900T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-N915T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: N910TUVU1ANK4_N910TTMB1ANK4
_TMB_Android_4.4.4.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
File has been created for a different phone model.
Selected firmware file: N915TUBU1AOA2_N915TUWA1AOA3
_PET_Android_4.4.4.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-N915T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
To connect SM-N915T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
ADB server killed.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Reading info, please wait...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-N915T
Firmware compiled date: Mon Jan 19 20:52:52 KST 2015
PDA version: N915TUBU1AOA2
CSC version: N915TUWA1AOA3
SW version: N915TUBU1AOA2
Phone IMEI: Unknown
Phone SN: R38FB0S72EM
Android version: 4.4.4 (KTU84P)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N915T
Selected file: C:\Users\Owner\Desktop\Note 4\N910G_
355306065643142.cert
Perform the following steps:
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Writing Certificate failed
via Welcome to gsm-tips http://ift.tt/1xYJEfc
Aucun commentaire:
Enregistrer un commentaire