eMMC Write OK! Elapsed time: 4.147237s (246.911 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 14.337820s (80.347 KiB/s)
All Done.
Checking NAND Image : D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Data partitions (firmware parts) count is 128 (dec)
Meta partitions (partitions storing partition table) count is 1 (dec)
Block size is 200
File successefuly loaded!
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
Warning: CMD Pullup Level (360 mV) too low , check cables etc.!!!
CMD Active Level:2021 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2361 mV
CMD Active Level:2134 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2382 mV
CMD Active Level:2124 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
eMMC Device Information
EMMC CID : 02000053444D30333290FFFFFFFF29BC
EMMC CSD : 8C0F002A015981E9B6D9FC1F8A4040AA
EMMC Manufacturer ID: 0002 , OEM ID: 0000
EMMC Date: 02/2006 Rev.0x90
EMMC NAME: SDM032 , S/N: 4294967295
EMMC ROM1 (Main User Data) Capacity: 30 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.0 (MMC 4.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: SDM032_4294967295_20150202_1637.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
ERROR: This eMMC are not Samsung!
Done!
Processing file...D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
Input file : D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Length has been corrected to 0x000001E9C000 bytes...
Retry writing adress 0x00000000 (Attempt #1)...
Retry Success !!! Disabling Write Optimistations...
Done. Write Speed: 757 kB/s
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
ERROR: This eMMC are not Samsung!
Done!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\SDM032_4294967295_20150 202_1438.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
EMMC Writing FOTA...
eMMC Write OK! Elapsed time: 3.985228s (256.949 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 13.819790s (83.359 KiB/s)
All Done.
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_EFS_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_EFS_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616FE1F0BFC123F ,FW Ver.: 01.52
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing EFS...
eMMC Write OK! Elapsed time: 68.793938s (238.161 KiB/s)
EMMC Writing MODEM_FS...
eMMC Write OK! Elapsed time: 71.963120s (227.672 KiB/s)
EMMC Writing MODEM_FS2...
eMMC Write OK! Elapsed time: 67.585869s (242.418 KiB/s)
EMMC Writing IPL_MODEM...
eMMC Write OK! Elapsed time: 0.515030s (124.265 KiB/s)
EMMC Writing MODEM...
eMMC Write OK! Elapsed time: 192.652023s (74.414 KiB/s)
All Done.
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_BOOT_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616FE1F0BFC123F ,FW Ver.: 01.52
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.351020s (364.652 KiB/s)
EMMC Writing MASTER_TOC...
eMMC Write OK! Elapsed time: 1.624092s (236.440 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.381250s (233.723 KiB/s)
EMMC Writing MD5...
eMMC Write OK! Elapsed time: 4.384251s (233.563 KiB/s)
EMMC Writing STE_BOOT1...
eMMC Write OK! Elapsed time: 3.549203s (144.258 KiB/s)
EMMC Writing STE_BOOT2...
eMMC Write OK! Elapsed time: 2.985171s (171.514 KiB/s)
EMMC Writing FOTA...
eMMC Write OK! Elapsed time: 4.147237s (246.911 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 14.337820s (80.347 KiB/s)
All Done.
phone cant power up:confused:
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 14.337820s (80.347 KiB/s)
All Done.
Checking NAND Image : D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Data partitions (firmware parts) count is 128 (dec)
Meta partitions (partitions storing partition table) count is 1 (dec)
Block size is 200
File successefuly loaded!
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
Warning: CMD Pullup Level (360 mV) too low , check cables etc.!!!
CMD Active Level:2021 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2361 mV
CMD Active Level:2134 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2382 mV
CMD Active Level:2124 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done.
Z3X EasyJtag Software ver. 1.7.0.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.52
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
eMMC Device Information
EMMC CID : 02000053444D30333290FFFFFFFF29BC
EMMC CSD : 8C0F002A015981E9B6D9FC1F8A4040AA
EMMC Manufacturer ID: 0002 , OEM ID: 0000
EMMC Date: 02/2006 Rev.0x90
EMMC NAME: SDM032 , S/N: 4294967295
EMMC ROM1 (Main User Data) Capacity: 30 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.0 (MMC 4.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: SDM032_4294967295_20150202_1637.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
ERROR: This eMMC are not Samsung!
Done!
Processing file...D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
Input file : D:\SoftWare\EasyJtag\Repair file\i8190\512mb_OK_locked\512mb_OK_locked.bin
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Length has been corrected to 0x000001E9C000 bytes...
Retry writing adress 0x00000000 (Attempt #1)...
Retry Success !!! Disabling Write Optimistations...
Done. Write Speed: 757 kB/s
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
ERROR: This eMMC are not Samsung!
Done!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\SDM032_4294967295_20150 202_1438.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.7.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2382 mV
CMD Active Level:2145 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
EMMC Writing FOTA...
eMMC Write OK! Elapsed time: 3.985228s (256.949 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 13.819790s (83.359 KiB/s)
All Done.
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_EFS_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_EFS_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616FE1F0BFC123F ,FW Ver.: 01.52
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing EFS...
eMMC Write OK! Elapsed time: 68.793938s (238.161 KiB/s)
EMMC Writing MODEM_FS...
eMMC Write OK! Elapsed time: 71.963120s (227.672 KiB/s)
EMMC Writing MODEM_FS2...
eMMC Write OK! Elapsed time: 67.585869s (242.418 KiB/s)
EMMC Writing IPL_MODEM...
eMMC Write OK! Elapsed time: 0.515030s (124.265 KiB/s)
EMMC Writing MODEM...
eMMC Write OK! Elapsed time: 192.652023s (74.414 KiB/s)
All Done.
Loading repair file: 'D:\SoftWare\EasyJtag\Repair file\i8190\Samsung GT-i8190_BOOT_V1.00.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I8190, Ver.: 1.01
Repair file options. : NONE
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: SAMSUNG GT-I8190 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 1616FE1F0BFC123F ,FW Ver.: 01.52
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.351020s (364.652 KiB/s)
EMMC Writing MASTER_TOC...
eMMC Write OK! Elapsed time: 1.624092s (236.440 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.381250s (233.723 KiB/s)
EMMC Writing MD5...
eMMC Write OK! Elapsed time: 4.384251s (233.563 KiB/s)
EMMC Writing STE_BOOT1...
eMMC Write OK! Elapsed time: 3.549203s (144.258 KiB/s)
EMMC Writing STE_BOOT2...
eMMC Write OK! Elapsed time: 2.985171s (171.514 KiB/s)
EMMC Writing FOTA...
eMMC Write OK! Elapsed time: 4.147237s (246.911 KiB/s)
EMMC Writing PARAM...
eMMC Write OK! Elapsed time: 14.337820s (80.347 KiB/s)
All Done.
phone cant power up:confused:
via Welcome to gsm-tips http://ift.tt/1y1ciXK
Aucun commentaire:
Enregistrer un commentaire