I killer my phone after error in firmware, but i have make jtag but no solution phone is dead, no enter in download mode
Default language ID 0x0416, LR 12
JTAG Interface Connected, S/N 0x8XXXXX6E
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 25/05/2014 18:59:00
================================================== ========
Phone Type : Samsung GT-S7562L
CPU Type : Qualcomm MSM7227A
Storage TYpe : eMMC 4GB
Boot Package : Full Boot Restore (4.0.4)
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Phone BATTERY should be CONNECTED!!!
3. Connect RJ-45 JTAG Cable to ATF Box
4. Connect USB Cable to the Phone
5. Click RESET JTAG button to check JTAG Connection
6. Click RESTORE BOOT button to Start Operation
----------------------------------------------------------
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...No Devices found in Chain!
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...1501004A4A53303041031E170FA3AF5E
Flash Description: Samsung JJS00A, 3.64 GiB, SN 1E170FA3, Oct 2012
Partition Config: No boot enabled, Boot ACK OFF (0x00)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (91370 Op/Sec)
Restoring MBR Data...OK
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Restoring Partition #4...OK
Restoring Partition #5...OK
Restoring Partition #6...OK
Restoring Partition #7...OK
Completed in 0h 3m 4s. Code Download Speed 112 KiB/sec.
Boot Restore Done!
================================================== ===========
Assemble Phone and Start Normally
If Phone cannot Start, perform USB Firmware Update Procedure
================================================== ===========
Default language ID 0x0416, LR 12
JTAG Interface Connected, S/N 0x8XXXXX6E
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 25/05/2014 18:59:00
================================================== ========
Phone Type : Samsung GT-S7562L
CPU Type : Qualcomm MSM7227A
Storage TYpe : eMMC 4GB
Boot Package : Full Boot Restore (4.0.4)
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Phone BATTERY should be CONNECTED!!!
3. Connect RJ-45 JTAG Cable to ATF Box
4. Connect USB Cable to the Phone
5. Click RESET JTAG button to check JTAG Connection
6. Click RESTORE BOOT button to Start Operation
----------------------------------------------------------
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...No Devices found in Chain!
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...1501004A4A53303041031E170FA3AF5E
Flash Description: Samsung JJS00A, 3.64 GiB, SN 1E170FA3, Oct 2012
Partition Config: No boot enabled, Boot ACK OFF (0x00)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (91370 Op/Sec)
Restoring MBR Data...OK
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Restoring Partition #4...OK
Restoring Partition #5...OK
Restoring Partition #6...OK
Restoring Partition #7...OK
Completed in 0h 3m 4s. Code Download Speed 112 KiB/sec.
Boot Restore Done!
================================================== ===========
Assemble Phone and Start Normally
If Phone cannot Start, perform USB Firmware Update Procedure
================================================== ===========
via Welcome to gsm-tips http://ift.tt/1z3CpAP
Aucun commentaire:
Enregistrer un commentaire