Z3X EasyJtag Software ver. 1.8.1.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: xxxxxxxxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2640 mV
eMMC Device Information
EMMC CID : FE014E4D4D433034473FC4220777C0CE
EMMC CSD : D04F01320F5913FFFFFFFFE78A40008E
EMMC Manufacturer ID: 00FE , OEM ID: 014E
EMMC Date: 12/2013 Rev.0x3F
EMMC NAME: MMC04G , S/N: 3290564471
EMMC NAME (HEX): 4D4D4330344700
EMMC ROM1 (Main User Data) Capacity: 3688 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: MMC04G_3290564471_20150204_1237.extcsd
Done.
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
USB Open Failed, Reason: PORT Open Error
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:2072 mV
CMD Active Level:2640 mV
Output file :E:\Program Files\EASYJTAG\file emmc\max g\EMMC_ROM1_00000000_100000000.bin
Reading 0x000100000000 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Read Length has been corrected to 0x0000E6800000 bytes...
Read Check Failed, Reason: CARD Data FIFO Timeout Error
deteck ok but not backup/read
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: xxxxxxxxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2640 mV
eMMC Device Information
EMMC CID : FE014E4D4D433034473FC4220777C0CE
EMMC CSD : D04F01320F5913FFFFFFFFE78A40008E
EMMC Manufacturer ID: 00FE , OEM ID: 014E
EMMC Date: 12/2013 Rev.0x3F
EMMC NAME: MMC04G , S/N: 3290564471
EMMC NAME (HEX): 4D4D4330344700
EMMC ROM1 (Main User Data) Capacity: 3688 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: MMC04G_3290564471_20150204_1237.extcsd
Done.
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
USB Open Failed, Reason: PORT Open Error
Z3X EasyJtag Software ver. 1.8.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:2072 mV
CMD Active Level:2640 mV
Output file :E:\Program Files\EASYJTAG\file emmc\max g\EMMC_ROM1_00000000_100000000.bin
Reading 0x000100000000 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Read Length has been corrected to 0x0000E6800000 bytes...
Read Check Failed, Reason: CARD Data FIFO Timeout Error
deteck ok but not backup/read
via Welcome to gsm-tips http://ift.tt/1FDhveZ
Aucun commentaire:
Enregistrer un commentaire