I9020 no power after repair by jtaq,

today i brought a new z3x jtaq interface,and i repair the first fone I9020 on this but no luck.kindly z3x team plz help.



here is logs.



Box Working Mode: JTAG Box.

Box Drivers version: 3.0.0.0, are OK

Z3X Card Serial : xxxxxxxxxx

Loading C:\Documents and Settings\Fone clinic\Desktop\Samsung GT-i9023_V1.01.rcp

Loading repair file: 'C:\Documents and Settings\Fone clinic\Desktop\Samsung GT-i9023_V1.01.rcp'

Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9023, Ver.: 1.01

Error loading information!

Easy-Repair file load OK!

Using EasyRepair Mode...

Checking repair data...

EasyJtag Suite ver.: 1.0.102.1 / wxWidgets 3.1.0-W-U started.

Operating system ver.: Windows XP (build 2600, Service Pack 3)

For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.

Initialising: SAMSUNG GT-I9023 Config ver.:1.01

I/O Level set to : 2800 mV

Box S/N: 04013008825D80DB ,FW Ver.: 01.48

Connecting to Target...

JTAG device: S5PC110

CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1

CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8

Halting CPU...

Initialize hardware...

Starting target communication...

Detecting nand memory parameters ...

NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found

NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages

NAND Writing BOOT...

NAND Write OK! Elapsed time: 185.390625s (133.858 KiB/s)

NAND Writing UPCH...

NAND Write OK! Elapsed time: 1.156250s (913.297 KiB/s)

All Done.

via Welcome to gsm-tips http://ift.tt/1fCLo1W