Xperia Ray (st18i) stuck on "sony ericsson" logo

Hello,



I have flashed a Xperia Ray (ST18i) and now it is stuck on the "sony ericsson" logo.



Can someone please advise on how to solve this problem,



Here are the logs;



4SE - tool 1.9.1 (S/N:000000000293 V1.1)

Selected model: Xperia™ ray (ST18)

Selected operation: Read info

Selected interface: USB (EROM)

Checking USB driver status...OK (SEMC Flash Device v3.0.0.0 | 11-25-2011)

Remove battery, wait a few seconds and insert it back

Plug USB cable holding "Volume Down" button

Connected to USB4

You can now release the keys and allow the process to run. Do not disconnect the phone

Device identification...OK

Chip:MSM8x55 Model:ST18i IMEI:35834304-xxxxxx-9 AID:0001 Color:RED

DEVICE_ID: C6283914285C274D0A3B98A7670215FFC80DB66D

EROM: 1241-3656 R9A028

Uploading logic MSM8x55:

Firmware details:

Software Id: 1248-9545

Software revision: 4.0.2.A.0.62

FS Id: WORLD-i

FS version: 4.0.2.A.0.62

CDA Id: 1252-3323

CDA version: R7D

Sending LoaderLIVE...OK

Detecting flash type...OK

ID: 98B3 (Toshiba)

Chip: Toshiba 8192 Mbit NAND (large page) x16

Logical address: 0x00000000

Size: 1056 Mb

Logical block size: 0x40000

Logical blocks count: 0x1000

OTP: LOCKED

LoaderAID:0001 EROMAID:0001 SWAID:0001 CustAID:0001 SIMLockAID:0001 HWConfAID:0001

FUSES(0-5): 00714B6D C8041447 28040815 DAA04780 200001B0 00000000

Reading TA security data...OK

Supported operations:

Flash, Unlock, Recovery, TA, Dump flash, Phone lock reset, Unlock by signature

Shutting down device...OK

Operation completed successfully. You can disconnect the phone now

FINISHED [8sec]





4SE - tool 1.9.1 (S/N:000000000293 V1.1)

Selected model: Xperia™ ray (ST18)

Selected operation: Flash

Selected interface: USB (EROM)

Checking USB driver status...OK (SEMC Flash Device v3.0.0.0 | 11-25-2011)

Remove battery, wait a few seconds and insert it back

Plug USB cable holding "Volume Down" button

Connected to USB4

You can now release the keys and allow the process to run. Do not disconnect the phone

Device identification...OK

Chip:MSM8x55 Model:ST18i IMEI:35834304-xxxxxx-9 AID:0001 Color:RED

DEVICE_ID: C6283914285C274D0A3B98A7670215FFC80DB66D

EROM: 1241-3656 R9A028

Uploading logic MSM8x55:

Sending LoaderLIVE...OK

Detecting flash type...OK

ID: 98B3 (Toshiba)

Chip: Toshiba 8192 Mbit NAND (large page) x16

Logical address: 0x00000000

Size: 1056 Mb

Logical block size: 0x40000

Logical blocks count: 0x1000

OTP: LOCKED

Reading TA security data...OK

ST18i 0001 Red (4.0.2.A.0.62 | 1252-3323/R7D) CUSTOMIZED UK/BLACK

Processing 278152275_0134C1FE5DC0.SIN_FILE_SET...

Flashing image apps_log_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image adsp_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image fota0_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image fota1_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image kernel_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image amss_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image cache_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin...OK

Processing 278290079_013534937348.SIN_FILE_SET...

Flashing image amss_fs_urushi_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin...OK

Flashing image userdata_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin...OK

Flashing image system_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin...OK

Shutting down device...OK

Operation completed successfully. You can disconnect the phone now

FINISHED [130sec]



I will be downloading the new release of 4se soon.



Thanks

via Welcome to gsm-tips http://ift.tt/1bZaJ7f